Factory Outlets Concrete Nuts And Bolts - Self-cutting Bottom Anchor,expansion Bolt Working Good At The Bottom, Anchor Can Be Made By Zinc Plated, Galvanized Bolt, Stainless Steel 304 Etc. Grade Can Be 4.8/5.8/6.8/8.8/10.9/12.9. High Strength, High Quality, Easy To Work. – Gusen

GUSEN self-cutting bottom anchor, made of galvanized, stainless steel and high corrosion resistant steel. The bolt and sleeve interaction achieves very high shear loads and ensures extremely high safety even for large crack widths.

Undercut Anchor is a heavy-duty self-cutting mechanical anchor for hardened concrete.Undercut anchors are not your typical anchors. The bottom of the hole has a notched opening, or undercut, made either with a special drill bit or with an anchor that has a drilling device at the end of the bolt. When in place, the anchor uses the compressive strength of the concrete to resist the load, unlike a wedge anchor, which relies on the concrete’s tensile strength.

anchor is a post-installed structural anchor designed for static, dynamic and seismic loading in the tension zone of both cracked and uncracked concrete.The anchor bolt is often used in bridge, railway, tunnel, subway, all kinds of pipe and cable bracket installation fixed, so the quality of production requirements are very high.

Self-undercutting facilitates fast and reliable installation without the need for a separate undercutting tool or additional operations.Combines the advantages of a post-installed mechanical anchor, flexibility and immediate loading, with the performance of a cast-in-place headed stud

Close spacing and small edge distance thanks to low expansion forces.The resulting keying effect provides a secure hold even in cracked concrete under dynamic loading.

undercut anchor provides mechanical interlock with the concrete, rather than frictional grip inside the hole typical of expansion anchors. Spring-loaded steel segments snap out into the undercut at the bottom of the hole, and the steel will remain clamped for the whole of its working life. In addition, the design allows reduced edge distances and center spacings without losing performance.

GUSEN self undercut anchor
4A mechanical anchor
Anti-fatigue 2 million times
Slat spray test 3000H
Installation date
Size:
Materials/grade
Depth
Drill diameter
Thickness of anchorage
Torque
Influence coefficient
Concrete cone damage -critical space -critical margin
Concrete splitting damage -min space – min margin –critical space –critical margin
Length of bolt